PIXELWORKS, INC.
MICRO CLIPPER
Category |
Video |
Video Types Supported |
CGA, VDI, CGI |
Video Processor |
Unidentified |
Highest Resolution Supported |
1024 x 816 |
Data Bus Type |
16-bit ISA and 8-bit ISA |
Memory Type |
VRAM |
Maximum Onboard Memory |
512 KB |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
9-pin analog video port |
J1 |
CGA/EGA pass-through |
J2 |
DMA CHANNEL SELECTION | ||
Channel |
WA |
WB |
6 |
Pins 1 & 2 closed |
Pins 1 & 2 closed |
7 |
Pins 3 & 4 closed |
Pins 3 & 4 closed |
INTERRUPT SELECTION | |
IRQ |
WC |
10 |
Pins 1 & 2 closed |
11 |
Pins 3 & 4 closed |
12 |
Pins 5 & 6 closed |
RESOLUTION SELECTION | ||
Resolution |
WD |
SW1/1 |
720 x 560 |
Pins 1 & 2 closed |
On |
1024 x 816 |
Pins 2 & 3 closed |
Off |
MONITOR SYNC CONFIGURATION | |
Mode |
WE |
Internal |
Pins 1 & 2 closed |
External |
Pins 3 & 4 closed |
ADDRESS SELECTION | |
Address |
SW1/2 |
330h |
Off |
340h |
On |
VIDEO PASS-THROUGH CONFIGURATION | |
Mode |
SW1/3 |
Disabled |
Off |
Enabled |
On |
CGA EMULATION CONFIGURATION | |
Mode |
SW1/4 |
Disabled |
Off |
Enabled |
On |
MISCELLANEOUS TECHNICAL NOTE |
This board is made up of two cards, attached at the corners. It must be installed in two slots simultaneously. When viewed from the backplate end, the card on the right is an 8-bit ISA, and the card on the left is a 16-bit ISA. |