ORCHID TECHNOLOGY
PRODESIGNER VGA/PRODESIGNER VGA +
Category |
Video |
Video Types Supported |
VGA |
Video Processor |
Unidentified |
Highest Resolution Supported |
640 x 480 |
Data Bus Type |
16-bit ISA |
Memory Type |
DRAM |
Maximum Onboard Memory |
256KB (VGA)/512KB (VGA+) |
CONNECTIONS | |
Purpose |
Location |
15-pin analog video port |
CN1 |
NMI SELECT | |
Setting |
JP1 |
NMI enable |
Closed |
NMI disable |
Open |
Note:If the Auto detect feature is used (Software) then this jumper must be enabled. On certain Compaq computers this causes a failure during boot up. |
BIOS BUS SELECT | |
Setting |
JP2 |
8-Bit BIOS |
Pins 1 & 2 closed |
16-Bit BIOS |
Pins 2 & 3 closed |
Note: Under newer revisions of the card JP2 is not functional. |