Card Type	Network Interface Card
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Unidentified
Network Transfer Rate	100Mbps
Topology	Ring, Peer-Peer
Wiring Type	Fiber optic cable
Data Bus	32-bit PCI

CONNECTIONS
Function	Label
Fiber optic connector - SC	CN1

DIAGNOSTIC LED(S)
LED1	Condition
On	Network connection good
Off	Network connection broken

DIAGNOSTIC LED(S) CONTINUED
LED2	LED3	LED4	Condition
Off	Off	On	Onboard SMT processor diagnostics in progress or failure (adapter not operational).
On	Blinking	Off	Onboard SMT processor providing Common Boot interface to host system.
Blinking	Off	Off	Onboard SMT processor providing Report Command interface to host system.
Blinking	On	Off	Network connection enabled and Report Command interface continuing.
Note: When the 5511 is either powered up or reset, the SMT processor automatically performs a series of onboard diagnostics. If the diagnostics complete successfully, LED4 (Error LED) will go to Off. If the diagnostics complete unsuccessfully, LED4 will remain on indicating processor initialization failure, and the adapter will be inoperational.