Card Type	Ethernet Transceiver
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Not available
Network Transfer Rate	10Mbps
Topology	Linear Bus
Wiring Type	AUI transceiver via DB-15 port, RG-58A/U 50ohm coaxial
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15	CN1	RG-58A/U 50ohm coaxial	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	SQE enabled	SW1	On
	SQE disabled	SW1	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Power is on
LED1	Green	Off	Power is off
LED2	Yellow	On	SQE is enabled
LED2	Yellow	Off	SQE is disabled

MISCELLANEOUS TECHNICAL NOTES

The AUI port should be directly connected to the workstation. If you cannot connect directly to the workstation, an AUI drop cable (which cannot exceed 3 feet in length) may be used.