ALLEN-BRADLEY
VISTALAN/PC MODELS 7310, 7320 (REV. B)
NIC Type |
VistaLAN (proprietary) |
Network Transfer Rate |
Unidentified |
Data Bus |
8-bit ISA |
Topology |
Linear Bus |
Wire Type |
RG-6A/U 75ohm coaxial |
Boot ROM |
Available |
CONNECTIONS | |
Function |
Label |
RG-6A/U 75ohm coaxial connector |
CN1 |
NODE ADDRESS | ||||||||
Setting |
SW1/1 |
SW1/2 |
SW1/3 |
SW1/4 |
SW1/5 |
SW1/6 |
SW1/7 |
SW1/8 |
1 |
Off |
On |
On |
On |
On |
On |
On |
On |
2 |
On |
Off |
On |
On |
On |
On |
On |
On |
3 |
Off |
Off |
On |
On |
On |
On |
On |
On |
4 |
On |
On |
Off |
On |
On |
On |
On |
On |
5 |
Off |
On |
Off |
On |
On |
On |
On |
On |
251 |
Off |
Off |
On |
Off |
Off |
Off |
Off |
Off |
252 |
On |
On |
Off |
Off |
Off |
Off |
Off |
Off |
253 |
Off |
On |
Off |
Off |
Off |
Off |
Off |
Off |
254 |
On |
Off |
Off |
Off |
Off |
Off |
Off |
Off |
255 |
Off |
Off |
Off |
Off |
Off |
Off |
Off |
Off |
Note: A total of 255 node address settings are available. The switches are a binary representation of the decimal node addresses. SW1/8 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: SW1/8=128, SW1/7=64, SW1/6=32, SW1/5=16, SW1/4=8, SW1/3=4, SW1/2=2, SW1/1=1. Turn off the switches and add the values of the switches that are off to obtain the correct node ID. (Off=1, On=0)Node address 0 is reserved and should not be used. |
INTERRUPT | |
Setting |
E1, E3 |
IRQ2 |
E1 closed |
IRQ3 |
E1 pin 2, E3 pin 1 closed |
IRQ4 |
E1 pin 2, E3 pin 2 closed |
IRQ5 |
E1 pin 2, E3 pin 3 closed |
Note:The settings for IRQ3, IRQ4, and IRQ5 may not be set without a wire-wrapping tool. |