Processor	Pentium
Processor Speed	75/90/100/120/133/150MHz
Chip Set	Intel
Video Chip Set	None
Maximum Onboard Memory	128MB (EDO supported)
Maximum Video Memory	None
Cache	256KB
BIOS	Award
Dimensions	330mm x 220mm
I/O Options	32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, serial ports (2), VRM connector
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
Floppy drive interface	J5	Turbo switch	JP21
Serial port 2	J7	IDE interface LED	JP22
Parallel port	J8	Green PC connector	JP23
Serial port 1	J9	Turbo LED	JP24
IDE interface 1	J10	Reset switch	JP25
IDE interface 2	J11	32-bit PCI slots	PC1 – PC4
Power LED & keylock	JP19	VRM connector	VRM
Speaker	JP20

DRAM CONFIGURATION
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	None
16MB	(2) 2M x 36	None
16MB	(2) 1M x 36	(2) 1M x 36
24MB	(2) 2M x 36	(2) 1M x 36
32MB	(2) 4M x 36	None
32MB	(2) 2M x 36	(2) 2M x 36
40MB	(2) 4M x 36	(2) 1M x 36
48MB	(2) 4M x 36	(2) 2M x 36
64MB	(2) 8M x 36	None
64MB	(2) 4M x 36	(2) 4M x 36
72MB	(2) 8M x 36	(2) 1M x 36
80MB	(2) 8M x 36	(2) 2M x 36
96MB	(2) 8M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36
Note: Board accepts EDO memory. Board also accepts x 32 SIMMs. Memory installed in Banks 1 & 2 is interchangeable.

CACHE CONFIGURATION
Size	Bank 0
256KB	(2) 32K x 32

CPU SPEED SELECTION
CPU speed	Clock speed	Multiplier	JP4	JP6	JP11	JP27
75MHz	50MHz	1.5x	3 & 5, 4 & 6	1 & 2	Open	Open
90MHz	60MHz	1.5x	2 & 4, 3 & 5	2 & 3	Open	Open
100MHz	66MHz	1.5x	1 & 3, 4 & 6	2 & 3	Open	Open
120MHz	60MHz	2x	2 & 4, 3 & 5	2 & 3	Closed	Open
133MHz	66MHz	2x	1 & 3, 4 & 6	2 & 3	Closed	Open
150MHz	60MHz	2.5x	2 & 4, 3 & 5	2 & 3	Closed	Closed
Note: Pins designated should be in the closed position.

CPU VOLTAGE SELECTION
Voltage	JP16
STD	Pins 1 & 2 closed
STD/VRE	Pins 5 & 6 closed

VOLTAGE REGULATOR SELECTION
Setting	VRM
VRM not installed	Pins 6 & 7, 21 & 22 closed
VRM installed	VRM installed

MISCELLANEOUS TECHNICAL NOTE

This board may have JP10 on the board, but it is not used.