INTEL CORPORATION
LT430TX
Processor |
Pentium |
Processor Speed |
90/100/120/133/150/166/200/233MHz |
Chip Set |
Intel |
Video Chip Set |
ATI |
Maximum Onboard Memory |
256MB (EDO supported) |
Maximum Video Memory |
2MB |
Cache |
256/512KB |
BIOS |
Unidentified |
Dimensions |
305mm x 244mm |
I/O Options |
32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), VGA port, IR connector, USB connectors (2), ATX power connector, microphone in, line in, line out, game/MIDI port, telephony connector, wavetable connector, wake on LAN connector, VESA/ATI Multimedia connector, CD-ROM audio in, ATAPI audio in, line audio in |
NPU Options |
None |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
ATX power connector |
ATX |
Speaker |
J1/pins 24 - 27 |
Game/MIDI port |
CN1 |
Wavetable connector |
J2 |
Microphone in |
CN2 |
ATAPI audio in |
J2G1 |
Line in |
CN3 |
CD-ROM audio in |
J2G2 |
Line out |
CN4 |
Line in audio |
J2H3 |
VGA port |
CN5 |
Telephony connector |
J2H4 |
Serial port 1 |
CN6 |
Serial port 2 |
J2J1 |
Parallel port |
CN7 |
VESA/ATI Multimedia connector |
J5F1 |
USB connector 1 |
CN8 |
Wake on LAN connector |
J6J1 |
USB connector 2 |
CN9 |
CPU fan power |
J6M1 |
PS/2 mouse port |
CN10 |
Floppy drive interface |
J7L2 |
Soft on power supply |
J1/pins 1 & 2 |
GPI connector |
J9A1 |
Green PC connector |
J1/pins 3 & 4 |
Chassis fan power |
J9A2 |
IR connector |
J1/pins 6 - 11 |
IDE interface 2 |
J9H1 |
IDE interface LED |
J1/pins 13 - 16 |
IDE interface 1 |
J10H1 |
Green PC LED |
J1/pins 18 - 20 |
32-bit PCI slots |
PC1 – PC4 |
Reset switch |
J1/pins 22 & 23 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
» |
Flash BIOS normal operation |
J8A1 |
Pins 1 & 2 closed |
Flash BIOS recovery mode |
J8A1 |
Pins 2 & 3 closed | |
» |
Password enabled |
J9C1A |
Pins 1 & 2 closed |
Password disabled |
J9C1A |
Pins 2 & 3 closed | |
» |
CMOS memory normal operation |
J9C1A |
Pins 4 & 5 closed |
CMOS memory clear |
J9C1A |
Pins 5 & 6 closed | |
» |
Flash BIOS write protect disabled |
J9C1B |
Pins 1 & 2 closed |
Flash BIOS write protect enabled |
J9C1B |
Pins 2 & 3 closed | |
» |
Factory configured - do not alter |
J9C1B |
Pins 4 - 6 open |
DIMM CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
8MB |
(1) 1M x 64 |
None |
16MB |
(1) 2M x 64 |
None |
16MB |
(1) 1M x 64 |
(1) 1M x 64 |
24MB |
(1) 2M x 64 |
(1) 1M x 64 |
32MB |
(1) 4M x 64 |
None |
32MB |
(1) 2M x 64 |
(1) 2M x 64 |
40MB |
(1) 4M x 64 |
(1) 1M x 64 |
48MB |
(1) 4M x 64 |
(1) 2M x 64 |
64MB |
(1) 8M x 64 |
None |
64MB |
(1) 4M x 64 |
(1) 4M x 64 |
72MB |
(1) 8M x 64 |
(1) 1M x 64 |
80MB |
(1) 8M x 64 |
(1) 2M x 64 |
96MB |
(1) 8M x 64 |
(1) 4M x 64 |
128MB |
(1) 16M x 64 |
None |
128MB |
(1) 8M x 64 |
(1) 8M x 64 |
136MB |
(1) 16M x 64 |
(1) 1M x 64 |
144MB |
(1) 16M x 64 |
(1) 2M x 64 |
160MB |
(1) 16M x 64 |
(1) 4M x 64 |
192MB |
(1) 16M x 64 |
(1) 8M x 64 |
256MB |
(1) 16M x 64 |
(1) 16M x 64 |
Note: Board accepts EDO memory. |
CACHE CONFIGURATION | |
Size |
Bank 0 |
256KB |
(2) 32K x 32 |
512KB |
(2) 64K x 32 |
Note: Board will be factory installed with one of the above configurations. |
VIDEO MEMORY CONFIGURATION |
Note: Bank 0 is factory installed with 2MB of video memory and is not configurable. |
CPU SPEED SELECTION | ||||
CPU speed |
Clock speed |
Multiplier |
J9C1C |
J9C1D |
90MHz |
60MHz |
1.5x |
4 & 5 |
1 & 2, 4 & 5 |
100MHz |
66MHz |
1.5x |
5 & 6 |
1 & 2, 4 & 5 |
120MHz |
60MHz |
2x |
4 & 5 |
2 & 3, 4 & 5 |
133MHz |
66MHz |
2x |
5 & 6 |
2 & 3, 4 & 5 |
150MHz |
60MHz |
2.5x |
4 & 5 |
2 & 3, 5 & 6 |
166MHz |
66MHz |
2.5x |
5 & 6 |
2 & 3, 5 & 6 |
200MHz |
66MHz |
3x |
5 & 6 |
1 & 2, 5 & 6 |
233MHz |
66MHz |
1.5x |
5 & 6 |
1 & 2, 4 & 5 |
Note: Pins designated should be in the closed position. |
CPU TYPE SELECTION | ||
Type |
J6M2 | |
» |
VRE |
Pins 2 & 3 closed |
STD |
Pins 1 & 2 closed |