Processor	80386SX (exact location unidentified)
Processor Speed	25MHz
Chip Set	Unidentified
Maximum Onboard Memory	16MB
Cache	512KB
BIOS	Unidentified
Dimensions	330mm x 218mm
I/O Options	External memory card, floppy drive interface, hard drive interface, parallel ports (2), serial ports (4), VGA port, cache connector, drawer port connector, magnetic card reader connector, touch screen board connector, riser slot
NPU Options	Unidentified

CONNECTIONS
Function	Label	Function	Label
VGA port	J1	Drawer port connector	J10
Parallel port 2	J2	Hard drive interface	J12
Parallel port 1	J3	Touch screen board connector	J13
Floppy drive interface	J4	Magnetic card reader connector	J14
Serial port 1	J5	Cache connector	J15
Serial port 2	J6	Multi-level keylock	J16
Chassis fan power (not used)	J7	Chassis fan power	J17
Serial port 3	J8	External memory card	SL1
Serial port 4	J9	Riser slot	SL2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	J18	N/A
»	Multi I/O address & data register address select 398H/399H	JP1	Pins 2 & 3 closed
	Multi I/O address & data register address 26EH/26FH	JP1	Pins 1 & 2 closed
»	Multi I/O configuration registers	JP2	Pins 1 & 2 closed
»	Multi I/O configuration registers	JP3	Pins 2 & 3 closed
»	Multi I/O configuration registers	JP4	Pins 2 & 3 closed
»	Multi I/O configuration registers	JP5	Pins 2 & 3 closed
»	Multi I/O configuration registers	JP6	Pins 2 & 3 closed
»	CMOS memory normal operation (1287A)	JP9	Open
	CMOS memory clear (1287A)	JP9	Pins 1 & 2 closed
»	CMOS memory normal operation (1287)	JP9	Open
	CMOS memory clear (1287)	JP9	Pins 2 & 3 closed
»	Cache window address select DC000H - DFFFFH	JP12	Open
	Cache window address select ECOOOH - EFFFFH	JP12	Closed
	Reset disabled	JP15	Open
	Reset enabled	JP15	Closed
»	AT bus speed select 8MHz	JP16	Pins 1 & 2 closed
	AT bus speed select 12MHz	JP16	Pins 2 & 3 closed
»	Factory configured - do not alter	JP18	Pins 2 & 3 closed
»	LCD contrast select LCDENA# signal for LCD power sequencing	JP19	Pins 2 & 3 closed
	LCD contrast select PWROFF signal for power sequencing	JP19	Pins 1 & 2 closed
	Touch screen select resistive keys	JP20	Pins 1 & 2 closed
	Touch screen select capacitive touch screen	JP20	Pins 2 & 3 closed

DRAM
Size	Bank 0	Bank 1	Bank 2	Bank 3	SL1
1MB	(1) 256K x 9	(1) 256K x 9	(1) 256K x 9	(1) 256K x 9	None
2MB	(1) 1M x 9	(1) 1M x 9	None	None	None
2MB	(1) 256K x 9	(1) 256K x 9	(1) 256K x 9	(1) 256K x 9	1MB on card
4MB	(1) 1M x 9	(1) 1M x 9	(1) 1M x 9	(1) 1M x 9	None
8MB	(1) 1M x 9	(1) 1M x 9	(1) 1M x 9	(1) 1M x 9	4MB on card
8MB	(1) 4M x 9	(1) 4M x 9	None	None	None
16MB	(1) 4M x 9	(1) 4M x 9	(1) 4M x 9	(1) 4M x 9	None

CACHE SIZE

Note: 512KB cache card is installed at J15.

CACHE WAIT STATE
Setting		JP13	JP14
»	0 wait state	Closed	Open
	1 wait states	Open	Closed

CPU PIPELINE
Setting		JP10	JP11	JP17
»	Pipeline enabled	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
	Pipeline disabled	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed

PARALLEL PORT 2 IRQ
IRQ		JP7
»	IRQ5	Pins 1 & 2 closed
	IRQ7	Pins 3 & 4 closed

SERIAL PORT 3 IRQ
Setting		IRQ	JP7
»	COM3	IRQ11	Pins 9 & 10 closed
	COM3	IRQ4	Pins 11 & 12 closed

SERIAL PORT 4 IRQ
Setting		IRQ	JP7
»	COM4	IRQ10	Pins 5 & 6 closed
	COM4	IRQ3	Pins 7 & 8 closed

PARALLEL PORT 2 ADDRESS
Setting		Address	JP8
»	LPT2	278H - 27FH	Pins 9 & 10 closed
	LPT1	378H - 37FH	Pins 11 & 12 closed

SERIAL PORT 3 ADDRESS
Setting		Address	JP8
	COM1	3F8H - 3FFH	Pins 3 & 4 closed
»	COM3	3E8H - 3EFH	Pins 1 & 2 closed

SERIAL PORT 4 ADDRESS
Setting		Address	JP8
	COM2	2F8H - 2FFH	Pins 7 & 8 closed
»	COM4	2E8H - 2EFH	Pins 5 & 6 closed