Processor	80386DX
Processor Speed	25MHz
Chip Set	C & T
Max. Onboard DRAM	16MB
Cache	None
BIOS	AMI
Dimensions	330mm x 218mm
I/O Options	None
NPU Options	80287/80387/3167

CONNECTIONS
Purpose	Location	Purpose	Location
Turbo LED	J1	Speaker	J3
Power LED & keylock	J2

USER CONFIGURABLE SETTINGS
Function		Jumper	Position
»	Pipeline mode enabled	J5	pins 2 & 3 closed
	Pipeline mode disabled	J5	pins 1 & 2 closed
»	Factory configured - do not alter	J6	pins 1 & 2 closed
»	CMOS memory normal operation	J14	pins 1 & 2 closed
	CMOS memory clear	J14	pins 2 & 3 closed
»	Reset enabled through hardware only	J16	pins 2 & 3 closed
	Reset enabled through hardware and keyboard	J16	pins 1 & 2 closed
»	Monitor type select color	J17	pins 2 & 3 closed
	Monitor type select monochrome	J17	pins 1 & 2 closed

DRAM CONFIGURATION
Size	File	Bank 0	Bank 1	Bank 2	Bank 3
1MB	1M.386	(4) 256K x 9	NONE	NONE	NONE
2MB	2M.386	(4) 256K x 9	(4) 256K x 9	NONE	NONE
4MB	4MK.386	(4) 256K x 9	(4) 256K x 9	(4) 256K x 9	(4) 256K x 9
4MB	4MM.386	(4) 1M x 9	NONE	NONE	NONE
8MB	8M.386	(4) 1M x 9	(4) 1M x 9	NONE	NONE
10MB	10M.386	(4) 256K x 9	(4) 256K x 9	(4) 1M x 9	(4) 1M x 9
16MB	16M.386	(4) 1M x 9	(4) 1M x 9	(4) 1M x 9	(4) 1M x 9
Note:After installing memory, run the setup 386 program and enter the applicable file name. This loads the appropriate values into the chipset.

NPU CONFIGURATION
Type	J4	J7	J10	J11
3167	pins 1 & 2 closed	pins 1 & 2 closed	pins 2 & 3 closed	pins 2 & 3 closed
80387	pins 2 & 3 closed	pins 1 & 2 closed	pins 2 & 3 closed	pins 1 & 2 closed
80287	pins 2 & 3 closed	pins 2 & 3 closed	pins 1 & 2 closed	pins 2 & 3 closed
None	pins 2 & 3 closed	pins 1 & 2 closed	pins 2 & 3 closed	pins 2 & 3 closed

NPU SPEED CONFIGURATION (80287)
Speed	J8	J9
High	pins 1 & 2 closed	pins 1 & 2 closed
Low	pins 2 & 3 closed	pins 2 & 3 closed