PATHLIGHT TECHNOLOGY
HIGH SPEED SSA DATA PUMP
|
Card Type |
Data Pump |
|
Chip Set |
Intel |
|
Maximum Onboard Memory |
512KB EPROM, 256KB SRAM |
|
I/O Options |
SSA interface via 9 pin serial ports (2 RS-232), Host-Side PCI bus, Top edge test card connector |
|
Data Bus |
32-bit PCI |
|
Card Size |
Half-length |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Host-side PCI bus |
CN3 |
9-pin serial port 1 |
J1 |
|
Top edge test card connector |
CN4 |
9-pin serial port 2 |
J3 |
|
USER CONFIGURABLE SETTINGS | ||
|
Function |
Label |
Position |
|
Port 1 external SSA connector enabled |
J2 |
Pins 3 & 4, 5 & 6, 11 & 12, 13 & 14 closed |
|
Port 1 external SSA connector disabled |
J2 |
Open |
|
Port 2 external SSA connector enabled |
J3 |
Pins 3 & 4, 5 & 6, 11 & 12, 13 & 14 closed |
|
Port 2 external SSA connector disabled |
J3 |
Open |
|
Note: If an SSA application does not require the use of external serial ports, a custom cable may be used to connect the odd number pins of J2 and/or J4 to an internal device loop. | ||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED 1 |
Green |
On |
Firmware loaded and executed |
|
LED 1 |
Green |
Off |
Firmware not loaded and executing or a serious error condition exists |
|
LED 2 |
Red |
On |
One or more SSA ports are active |
|
LED 2 |
Red |
Off |
No ports are active |