Data bus:	32-bit, VL-bus
Size:	Three/quarter-length, full-height card
Hard drive supported:	Four IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE (AT) interface connector - port 1	CN1
40-pin IDE (AT) interface connector - port 2	CN2
34-pin control cabled connector - floppy drive	CN3
4-pin connector - drive active LED	JP2

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Factory configured - do not alter	JP1	N/A
»	33MHz CPU installed	JP3	Pins 2 & 3 closed
	50MHz CPU installed	JP3	Pins 1 & 2 closed

MISCELLANEOUS TECHNICAL NOTES

At least one bank of SIMMS must be installed for the card to operate. Any combination of 256KB, 1MB, or 4MB (80ns) SIMMS can be installed.