Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drives supported:	Two IDE(AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
4-pin connector - Drive Active LED	CN1
34-pin control cable connector - floppy drive	CN2
40-pin IDE(AT) Interface connector	CN3
10-pin serial port 1 (COM1) - internal	CN4
10-pin serial port 2 (COM2) - internal	CN5
15-pin game port - external	CN6
25-pin parallel port - external	CN7

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	FDD	open
	Floppy drive disabled	FDD	closed
»	Hard drive enabled	IDE	open
	Hard drive disabled	IDE	closed
	IRQ14 without Active control output	JP3	pins 2 & 3 closed
	IRQ14 with Active control output	JP3	pins 1 & 2 closed
	IOCS16 with Buffer output	JP8	pins 1 & 2 closed
	IOCS16 without Buffer output	JP8	pins 2 & 3 closed

PARALLEL PORT (CN7) CONFIGURATION
LPT		Jumper P1	Jumper P2	Jumper PRT
	Disabled	open	open	open
	LPT3 (278-27Fh)	open	closed	pins 2 & 3 closed
»	LPT2 (378-37Fh)	closed	open	pins 1 & 2 closed

SERIAL PORT 1 (CN4) CONFIGURATION
COM		Jumper S1	Jumper S3	Jumper ACE1
	Disabled	open	open	open
»	COM1 (3F8-3FFh)	closed	open	pins 2 & 3 closed
	COM3 (3E8-3EFh)	open	closed	pins 2 & 3 closed
	COM4 (2E8-2EFh)	closed	closed	pins 1 & 2 closed

SERIAL PORT 2 (CN5) CONFIGURATION
COM		Jumper S2	Jumper S4	Jumper ACE2
	Disabled	open	open	open
»	COM2 (2F8-2FFh)	closed	open	pins 1 & 2 closed
	COM4 (2E8-2EFh)	open	closed	pins 1 & 2 closed
	COM3 (3E8-3EFh)	closed	closed	pins 2 & 3 closed