Data bus:	32-bit, VL-Bus
Size:	Three quarter-length, half-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
25-pin parallel port	J1
9-pin serial port 1 (external)/10-pin serial port (internal)	J2
10-pin serial port 2 - internal	J4
34-pin connector - floppy drive	J5
40-pin IDE(AT) interface	J6
4-pin drive active LED	J7

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Factory configured - do no alter	JP4	open
»	IDE interface enabled	JP6	pins 1 & 2 closed
	IDE interface disabled	JP6	pins 2 & 3 closed
»	Floppy drive interface enabled	JP7	pins 1 & 2 closed
	Floppy drive interface disabled	JP7	pins 2 & 3 closed

BASE ADDRESS SELECTION
Address		JP3/1	JP3/2	JP3/3
»	C800-CBFFh	closed	closed	closed
	CC00-CFFFh	open	closed	closed
	D000-D3FFh	closed	open	closed
	D400-D7FFh	open	open	closed
	D800-DBFFh	closed	closed	open
	DC00-DFFFh	open	closed	open
	Disabled	open	open	closed
	Disabled	open	open	open

PARALLEL PORT CONFIGURATION
LPT		JP12	JP13
»	LPT2	pins 2 & 3 closed	pins 1 & 2 closed
	LPT1	pins 1 & 2 closed	pins 2 & 3 closed
	LPT3	pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT 1 & 2 CONFIGURATION
COM (Serial Port 1)		COM (Serial Port 2)	JP9	JP10	JP11
»	COM1	COM2	pins 1 & 2	pins 1 & 2	pins 2 & 3
	COM2	COM1	pins 1 & 2	pins 1 & 2	pins 1 & 2
	COM3	COM4	pins 2 & 3	pins 2 & 3	pins 1 & 2
	COM1	Disabled	pins 1 & 2	pins 2 & 3	pins 2 & 3
	COM2	Disabled	pins 2 & 3	pins 1 & 2	pins 1 & 2
	Disabled	COM1	pins 1 & 2	pins 2 & 3	pins 1 & 2
	Disabled	COM2	pins 2 & 3	pins 1 & 2	pins 2 & 3
	Disabled	Disabled	pins 2 & 3	pins 2 & 3	pins 2 & 3
Note: Designated pins are in the closed position.

SERIAL PORT 1 & 2 INTERRUPT SELECTION
IRQ (Serial Port 1)		IRQ (Serial Port 2)	JP5	JP8
»	4	3	pins 1 & 2	pins 2 & 3
	3	4	pins 2 & 3	pins 1 & 2
Note: Designated pins are in the closed position.

MISCELLANEOUS TECHNICAL NOTES

IRQ 7 for the parallel port is factory configured and cannot be altered.