Data bus:	32-bit, VL-Bus
Size:	Full-length, half-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
9-pin serial port (COM1/3) - external	CN1
25-pin parallel port (LPT1/2) - external	CN2
40-pin IDE(AT) Interface connector	JP4
34-pin control cable connector - floppy drive	JP6
10-pin serial port (COM2/4) - internal	JP8
15-pin game port - internal	JP9
4-pin connector - Drive active LED	JP20

PARALLEL PORT CONFIGURATION
LPT		Jumper J6	Jumper J7
	LPT2 (378-37Fh)	pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	pins 1 & 2 closed	pins 2 & 3 closed
	LPT3 (278-27Fh)	pins 2 & 3 closed	pins 1 & 2 closed
»	LPT1 (3BC-3BFh)	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT INTERRUPT REQUEST
IRQ		Jumper JP14	Jumepr JP15
»	Parallel port interrupt is disabled	open	open
	Parallel port interrupt is IRQ7	open	closed
	Parallel port interrupt is IRQ5	closed	open

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	J1	Pins 2 & 3 closed
	Floppy drive disabled	J1	Pins 1 & 2 closed
»	Hard drive port address is 1F0-1F7h	J2	Pins 2 & 3 closed
	Hard drive port address is 170-177h	J2	Pins 1 & 2 closed
»	Floppy drive A:/B: order normal	J3	Pins 2 & 3 closed
	Floppy drive A:/B: order changed	J3	Pins 1 & 2 closed
»	Hard drive enabled	J4	Pins 2 & 3 closed
	Hard drive disabled	J4	Pins 1 & 2 closed
»	Hard drive I/O port address is 1F0-1F7, 3F0-3F7h	J5	Pins 2 & 3 closed
	Hard drive I/O port address is 170-177, 370-377h	J5	Pins 1 & 2 closed
»	Game port enabled	J12	pins 2 & 3 closed
	Game port disabled	J12	pins 1 & 2 closed
»	IDE Cycle is VESA	J15 JP17	pins 2 & 3 closed open
	IDE Cycle is ISA	J15 JP17	pins 1 & 2 closed closed
»	VL bus clock speed is 33MHz or 50MHz	J16	pins 2 & 3 closed
	VL bus clock speed is 25MHz or 40MHz	J16	pins 1 & 2 closed
»	One IDE(AT) hard drives supported	JP5	closed
	Two IDE(AT) hard drives supported	JP5	open
»	Parallel Port (CN2) is an I/O port	JP7	closed
	Parallel Port (CN2) is an input port only	JP7	open
»	Hard drive interrupt is IRQ14	JP10	closed
	Hard drive interrupt is disabled	JP10	open
»	Serial Port 2 interrupt is IRQ3	JP11	closed
	Serial Port 2 interrupt is disabled	JP11	open
»	Serial Port 1 interrupt is IRQ4	JP12	closed
	Serial Port 1 interrupt is disabled	JP12	open
»	Floppy drive interrupt is IRQ6	JP13	closed
	Floppy drive interrupt is disabled	JP13	open
	Factory Configured - do not alter	JP16	open
	Factory Configured - do not alter	JP18	open

SERIAL PORT 1 CONFIGURATION
COM		Jumper J8	Jumper J9
	COM3	pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	pins 1 & 2 closed	pins 2 & 3 closed
	COM4	pins 2 & 3 closed	pins 1 & 2 closed
»	COM1	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION
COM		Jumper J10	Jumper J11
	COM4	pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	pins 1 & 2 closed	pins 2 & 3 closed
	COM4	pins 2 & 3 closed	pins 1 & 2 closed
»	COM2	pins 2 & 3 closed	pins 2 & 3 closed