KINGSTON TECHNOLOGY CORPORATION
KTM-DCAT/127, KTM-DCAT/209, KTM-DCAT/260,
KTM-DCAT/340
|
Card Type |
Memory card, Fixed hard drive, Hard drive controller card |
|
Maximum Onboard Memory |
16MB DRAM |
|
Hard Drives supported |
One fixed proprietary drive |
|
Data Bus |
16-bit ISA |
|
Card Size |
Full-length, full-height card |
|
CONNECTIONS | |
|
Function |
Label |
|
Proprietary hard drive interface |
CN1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
| » |
Memory disabled |
SW1/1 |
On |
|
Memory enabled |
SW1/1 |
Off | |
| » |
Card is first memory board in PC |
SW1/2 |
On |
|
Card is second memory board in PC |
SW1/2 |
Off | |
| » |
Factory configured - do not alter. |
SW1/3 |
On |
| » |
Parity checking enabled |
SW1/6 |
On |
|
Parity checking disabled |
SW1/6 |
Off | |
|
ROM ADDRESS SELECT | |||
|
Address |
SW1/4 |
SW1/5 | |
| » |
C800h (non-bootable) |
On |
On |
|
CC00h (non-bootable) |
Off |
On | |
|
D800h (non-bootable) |
On |
Off | |
|
DC00h (bootable) |
Off |
Off | |
|
BANK 1 DRAM CONFIGURATION | ||
|
Size |
SW2/1 |
SW2/2 |
|
No SIMMs installed |
On |
On |
|
2MB ((2) x 1MB ) |
Off |
On |
|
8MB ((2) x 4MB) |
Off |
Off |
|
Note: Bank 1 is market as P1 and P2 on the card (exact location unidentified). Bank 1 must be filled first before memory in Bank 2 can be detected. | ||
|
BANK 2 DRAM CONFIGURATION | ||
|
Size |
SW2/1 |
SW2/2 |
|
No SIMMs installed |
On |
On |
|
2MB ((2) x 1MB ) |
Off |
On |
|
8MB ((2) x 4MB) |
Off |
Off |
|
Note: Bank 2 is market as P3 and P4 on the card (exact location unidentified). Bank 1 must be filled first before memory in Bank 2 can be detected. | ||