INI-9090U

INITIO CORPORATION

INI-9090U

Card Type

Hard drive controller

Data Bus

32-bit PCI

Card Size

Half-length, full-height card

Hard Drives supported

Up to 7 Ultra SCSI devices

Floppy drives supported

None

CONNECTIONS

Function

Location

Function

Location

50-pin SCSI connector - internal

J1

4-pin connector - drive active LED

J3

50-pin SCSI connector - external

J2

USER CONFIGURABLE SETTINGS

Function

Label

Position

»
Host adapter is only one in system (see note below)

JP1

Open

Host adapter shares SCSI bus with adapter in another computer

JP1

Closed

»
PC BIOS select

JP2

Pins 1 & 2 closed

MAC BIOS select

JP2

Pins 2 & 3 closed

Note: Closing jumper JP1 sets active termination so it is always on. The setting is used when the adapter shares the SCSI bus with an adapter in another computer. If that computer can be turned off, closing the jumper will insure that active on-board termination is on all the time, regardless of whether power is applied or not.

Card Type	Hard drive controller
Data Bus	32-bit PCI
Card Size	Half-length, full-height card
Hard Drives supported	Up to 7 Ultra SCSI devices
Floppy drives supported	None

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector - internal	J1	4-pin connector - drive active LED	J3
50-pin SCSI connector - external	J2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Host adapter is only one in system (see note below)	JP1	Open
	Host adapter shares SCSI bus with adapter in another computer	JP1	Closed
»	PC BIOS select	JP2	Pins 1 & 2 closed
	MAC BIOS select	JP2	Pins 2 & 3 closed
Note: Closing jumper JP1 sets active termination so it is always on. The setting is used when the adapter shares the SCSI bus with an adapter in another computer. If that computer can be turned off, closing the jumper will insure that active on-board termination is on all the time, regardless of whether power is applied or not.