C P - 3 5 0 0 CONNER NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders 1806| | | Capacity form/unform 544/ MB Heads 12| | | Seek time / track 12.0/ 3.0 ms Sector/track 49| | | Controller SCSI2 SINGLE-ENDED Precompensation 65535 Cache/Buffer 256 KB Landing Zone 1805 Data transfer rate 2.500 MB/S int Bytes/Sector 512 5.000 MB/S ext SYNC Recording method RLL 2/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 60 Power: sleep W Humidity % 8 80 | 8 80 standby W Altitude km -0.061 3.050| 12.200 idle 5.3 W Shock g 5 | 50 seek 7.8 W Rotation RPM 4500 read/write 6.0 W Acoustic dBA 40 spin-up W ECC Bit MTBF h 150000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** J U M P E R S ********************************************************************** CONNER CP3500 JUMPER SETTING Jumper Setting ============== SCSI ID ------- There are three jumpers available for configuration of SCSI ID: E1, E2, and E3. +-------+-------+-------+-------+ |E1 |E2 |E3 |SCSI ID| +-------+-------+-------+-------+ |OPEN |OPEN |OPEN | 0 | +-------+-------+-------+-------+ |CLOSED |OPEN |OPEN | 1 | +-------+-------+-------+-------+ |OPEN |CLOSED |OPEN | 2 | +-------+-------+-------+-------+ |CLOSED |CLOSED |OPEN | 3 | +-------+-------+-------+-------+ |OPEN |OPEN |CLOSED | 4 | +-------+-------+-------+-------+ |CLOSED |OPEN |CLOSED | 5 | +-------+-------+-------+-------+ |OPEN |CLOSED |CLOSED | 6 | +-------+-------+-------+-------+ |CLOSED |CLOSED |CLOSED | 7 | +-------+-------+-------+-------+ E4 Disable spin --------------- Disable spin: A jumper in the E4 location, disables spin up on power-on. Disabling spin up on application of power can also be enabled by setting the DSPN bit in MODE SELECT page 0. +------+------+---------------------+ | E5 | DSPN | Result | +------+------+---------------------+ | IN | 0 | Spin Disabled | +------+------+---------------------+ | IN | 1 | Spin Disabled | +------+------+---------------------+ | OUT | 0 | Spin up on Power On | +------+------+---------------------+ | OUT | 1 | Spin Disabled | +------+------+---------------------+ SCSI priority is always enabled in both directions.