S T 9 1 4 0 A G SEAGATE NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 2.5"/SUPERSLIMLINE Cylinders | 980| | Capacity form/unform 128/ MB Heads 4| 15| | Seek time / track 16.0/ 5.0 ms Sector/track | 17| | Controller IDE / AT Precompensation Cache/Buffer 120 KB ADAPTIVE Landing Zone Data transfer rate 2.800 MB/S int Bytes/Sector 512 MB/S ext Recording method RLL 1/7 operating | non-operating -------------+-------------- Supply voltage 5 V Temperature *C | Power: sleep 0.1 W Humidity % | standby 0.1 W Altitude km | idle 0.6 W Shock g 100 | 150 seek 1.7 W Rotation RPM 3545 read/write W Acoustic dBA spin-up W ECC Bit MTBF h 300000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** SEAGATE ST9140/9550/9190/9145AG PRODUCT SPECIFICATION +---------------------------------------------------------+ | |XX | |XX 44-pin | |XX I | |XX N | |XX T | |XX E | |*X R | |XX F | |XX A | |XX C | |XX E | |XX1 | |+-+ +---------------------------------------------------------++-+ Master/ Slave ********************************************************************** J U M P E R S ********************************************************************** SEAGATE ST9140/9550/9190/9145AG PRODUCT SPECIFICATION Jumper Setting ============== Master/Slave selection ---------------------- Interface J1 Jumper +-------------------------------------------+ +------+ |o o o o o o o o o o o o o o o o o o o o o 1| | A C | |o o o o o o o o o o o o * o o o o o o o o o| | B D | 44------------------------------------------+ +------+ ---------------------------------------------------------PWA------ Pin 41 +5VDC Pin 42 +5VDC Pin 43 GND Pin 44 Reserved Drive uses +5VDC power supplied to the drive via the interface connector. The drive does NOT make use of a +12VDC power line. Pin-20 removed for keying Jumper for Pins Configuration A and B C and D ------------------------------------------------------------------ OPEN OPEN Drive is Master, no Slave present CLOSED OPEN Drive is Master, Seagate Slave drive present OPEN CLOSED Drive is Slave to another Seagate 2.5" Master CLOSED CLOSED Reserved Position (Do not use)